Remote Locking 8X8 Axle DIY Kit for Scale Off-Road 1/10 to 1/14 Trucks

OVERVIEW
Build an awesome custom 8-wheeled machine by starting with our new Remote Locking Billet Machined 8X8 Axle DIY Conversion Kit. Each individual axle has a cable-operated locking lever that allows you to remotely control each axle independently if you wish (minimum 6-channel radio needed for individual locker operation). The included locking cables can be used separately or tied together to one aux. servo (not included) to trigger the lockers simultaneously. The axles are sized for 1/10 or 1/14-scale projects, and features alloy housings, alloy knuckles and caster blocks (front only), HD drive shafts, alloy hex hubs, and front steering linkage.
The ‘front’ steering axles are 170mm wide, the ‘rear’ straight axles are 155mm wide (for use with 1/14-scale dually rear wheels). drive axles are 4mm in diameter and use a standard 12mm touring-car type hex adaptor. Also:
Axle #1 (furthest forward) has steering knuckles and a single center output.
Axle #2 (middle-front) has steering knuckles and dual offset input/output.
Axle #3 (middle-rear) is a straight axle with dual offset input/output.
Axle #4 (furthest rearward) is a straight axle and a center input.
Finally, remote locking is cable actuated, cables are included. The 8X8 axle kits are available in black, gunmetal, or silver finishes. NOTE: This is a custom kit for DIY applications, it is not a direct bolt-on for any specific RC vehicle.

Item# C26809SILVER
Barcode: 91789025726