Diff between reg and current: | Diff between reg and current x qty:
Diff between reg and current: | Diff between reg and current x qty:
Billet Machined Alloy Gearbox Housing for Axial SCX10 II w/ LCG Transfer Case
C27126HARD
27 in stock
OVERVIEW
Strengthen your 1/10-scale Axial SCX10 II by swapping out the stock gearbox housing for our Billet Machined Alloy Gearbox Housing w/LCG Transfer Case. Simply swap in your stock internals for an easy,bolt-on upgrade. The Billet Machined Alloy Gearbox Housing w/LCG Transfer Case is compatible with the kit version of the SCX10 II; additional parts may be required for compatibility with models not equipped with the LCG gearbox,such as the SCX10 II RTR. The gearbox is available in black,gunmetal,’hard finish’ or silver colors.
Item# C27126HARD Barcode: 91789027594
Item number C27126HARD is a compatible upgrade part for Axial AX90046
Fitment and tips
Tip: Storage/carrying accessory. Verify internal dimensions and what you plan to carry.
| Weight | 0.31 lbs |
|---|
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
1 review for Billet Machined Alloy Gearbox Housing for Axial SCX10 II w/ LCG Transfer Case
Clear filtersOnly logged in customers who have purchased this product may leave a review.
Related products
Replacement Shocks for AFA01 1/8 Rock Crawler
2 in stock
Diff between reg and current: | Diff between reg and current x qty:
Replacement Arm for T6712PURPLE
2 in stock
Diff between reg and current: | Diff between reg and current x qty:
Eagle Racing 7.2V Gold Plated Tamiya Type Connectors w/wires 10pcs
7 in stock
Diff between reg and current: | Diff between reg and current x qty:
Replacement Allen Hex Tip for Wrench 2.5mm (Motor Screw)(L=100mm) (O.D.=3mm)
39 in stock
Diff between reg and current: | Diff between reg and current x qty:
Replacement Allen Hex Tip for 4-40 Wrench 3/32 (Cap Screw)(L=100mm) (O.D.=3mm)
5 in stock
Diff between reg and current: | Diff between reg and current x qty:
AKA Pro Delrin Motor Pinion 0.125 Bore 64 Pitch 27T
11 in stock
Diff between reg and current: | Diff between reg and current x qty:
Ball Bearing 5 X 11 Unflanged (1) each
358 in stock
Diff between reg and current: | Diff between reg and current x qty:
AKA Delrin Spur 64 Pitch 120T
26 in stock
Diff between reg and current: | Diff between reg and current x qty:
AKA Pro Delrin Motor Pinion 0.125 Bore 64 Pitch 24T
7 in stock
Diff between reg and current: | Diff between reg and current x qty:
Ball Bearing 1/8 X 3/8 Unflanged-Motor (1) each
3 in stock
Diff between reg and current: | Diff between reg and current x qty:
AKA Pro Delrin Motor Pinion 0.125 Bore 64 Pitch 22T
43 in stock
Diff between reg and current: | Diff between reg and current x qty:
Replacement Wheel Part for C26869GREEN
23 in stock
Diff between reg and current: | Diff between reg and current x qty:
Bryan –
Excellent Gearbox.
No one knew if the SSD 2 Speed Gears would work with the Integy Gearbox. For the Cheap $$ I thought I would try it. Well the gears didn’t fit,the gears rubbed 2 or 3 areas in the Nose cap. But I wanted to see if I could make it work. I pulled out my Rotary Tool and put a 1/4″ drum sander on it. I started to sand and grind inside the nose piece little bit at a time then assembled the gears to check clearances and after a half dozen or more tries, all the gears turned freely. Not going to lie but it probably took me at least 4 or more hours to complete because every time I sanded the case I had to vacuum all the shavings before I did a trial fit with the gears.
This is an awesome looking case
I would’ve given 5 Stars if it worked without any mods.