Universal Setup Station for Most 1/8 Off-Road, MT, & 1/10 GT

OVERVIEW
If you have ever been to a race track you will know that proper chassis setup is critical, and can be the difference between a DNF and a checkered flag. for most 1/8-scale GT, buggy, truggy, and monster truck owners we offer our 30-piece Universal Setup Station System. Crafted from aluminum and anodized in a gunmetal finish, the setup station can measure each corner of your vehicle individually – up to 15-degrees of camber, 30-degrees of caster, and +35/-40-degrees of toe. The measuring plates all ride on ball bearings for smooth movement and precise readings.

Out of the box, the Universal Setup Station System will work with most 1/8-scale buggy or truggy with standard 1/8-scale axles and wheel nuts, such as: Associated RC8/RC8T, SC8; Hobao Hyper Series; HPI/Hot Bodies D8/D8T, Hellfire; Kyosho Inferno Series; Losi 8IGHT/8IGHT-T series; Mugen MBX/MBXT series, OFNA LX One; Tamiya 801x/801xt series, XRAY XB8, 808 series, etc.

The Universal Setup Station comes with two sets of adaptors; the Type-A adaptors are for vehicles with 6mm x M5-threaded axles such as the Traxxas Revo/T-Maxx 2.5/3.3, HPI E-Savage, and Losi LST1. The Type-B adaptors are for the HPI Savage 2.5/4.6/X/XL which uses 8mm x M5-threaded axles with a reverse thread on one side.

Other adapters are available (sold separately) to adapt the setup station to other 1/8 and 1/10 vehicles, please refer to our Universal Setup Station Axle Adapter Fitment Chart to find the correct adapters for your application. You can download the Universal Setup Station Axle Adapter Fitment Chart from HERE.