i8MT 4X4 Brushless RTR 1/8 Performance Monster Truck by INTEGY

OVERVIEW
When you want to go big, go BIG with our 1/8-scale i8MT Brushless Performance RTR Monster Truck! With its jumbo 6×3.25-inch monster truck tires, you can go practically anywhere the road (or no road) takes you. This complete monster truck package is ready to run thanks to a powerful pre-installed SPECS S8A RTR ESC and SPECS 1510Kv brushless motor. The S8A RTR ESC can handle 2S-4S LiPo, and has an 80a continuous/380a burst rating. The 1/8-scale brushless motor is sensorless, and features an anodized aluminum heatsink motor mount with cooling fins as well as a large 40mm cooling fan. An FS-GT3B 2.4gHz radio system with high-torque S1490 steering servo is also pre-installed.
The i8MT sports a heavy duty anodized alloy chassis with Lexan mud guards and a molded upper deck. The center drive shaft uses heavy-duty outputs and powers all four wheels through a triple differential system; each diff uses metal internal gears for strength. Long-reach universal drive shafts are found up front, while dogbones send power to the rear. The jumbo monster truck tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. The i8MT independent suspension features tough, reinforced and extra-long suspension arms, oversized hub carriers, Heavy duty upper adjustable turnbuckles with oversized ball ends, and big-bore long-stroke oil-filled shocks with threaded preload adjustment and adjustable mounting angles. The steering rods are also heavy-duty, with adjustable turnbuckles and a dual bellcrank steering system with built-in servo saver. Both front and rear shock towers are crafted from 4mm thick anodized alloy. The lower suspension shaft braces and steering drag link are made from 3mm anodized alloy.
With the versatile battery mount, you can power the i8MT with a single 2S or 3S LiPo stick pack,a pair of 2S LiPo packs, or 1/8-scale 4S brick LiPo packs. Both ends of the monster truck are protected by huge molded bumpers with integrated skid plates. A monster truck-style body that is already precut and prefinished tops it all off.
CHASSIS
Anodized alloy lower deck and molded upper deck
Versatile battery compartment
Lexan mud guards
Oversized front/rear molded bumpers
DRIVETRAIN
4WD Center drive shaft
Front/center/rear gear differentials with metal internal gears
Adjustable anodized alloy heatsink motor mount
Front universal drive shafts
Rear steel dogbones and axles
Full ball bearings in drivetrain
6×3.25-inch jumbo monster truck tires
SUSPENSION
Extra-long lower suspension arms
Turnbuckle adjustable upper links with oversized ball ends
Big bore, long-stroke oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable shock angle
Adjustable upper link mounting points
STEERING
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out
Built-in servo saver
MORE
Pre-installed 2.4gHz FS-GT3B 3-channel pistol grip radio system
Pre-installed SPECS S8A RTR 80A brushless ESC (100% FWD/25% REV)
Pre-installed SPECS 1/8-scale 1510Kv sensorless brushless motor w/cooling fan
Pre-installed S1490 steering servo
Pre-mounted and pre-glued Monster Truck tires
SPECIFICATIONS
length: 20.5-inches (521mm)
Width: 14-inches (356mm)
Height: 11-inches (279mm)
Wheelbase: 12-inches (317mm)
Weight (no batteries): 8 lbs. 3.2-oz. (3719g)
To get up and running you will need:
2S-4S LiPo battery pack
LiPo charger
8x AA-size batteries for the transmitter

Item# i8MT-2016W
Barcode: 917890010915