Diff between reg and current: | Diff between reg and current x qty:
Diff between reg and current: | Diff between reg and current x qty:
Universal Setup Station w/ Bag for Most 1/8 & 1/10 Off-Road, SC & Monster Trucks
C23291
OVERVIEW
If you have ever been to a race track you will know that proper chassis setup is critical, and can be the difference between a DNF and a checkered flag. for 1/8-scale buggy, truggy, and monster truck owners we offer our 30-piece Universal Setup Station System. Crafted from aluminum and anodized in a gunmetal finish, the setup station can measure each corner of your vehicle individually – up to 15-degrees of camber, 30-degrees of caster, and +35/-40-degrees of toe. The measuring plates all ride on ball bearings for smooth movement and precise readings. The included carrying bag features a rubber grip handle and a two-sided zipper for storing the station when you are on the move.
Out of the box, the Universal Setup Station System will work with most 1/8-scale buggy or truggy with standard 1/8-scale axles and wheel nuts, such as: Associated RC8/RC8T, SC8; Hobao Hyper Series; HPI/Hot Bodies D8/D8T, Hellfire; Kyosho Inferno Series; Losi 8IGHT/8IGHT-T series; Mugen MBX/MBXT series, OFNA LX One; Tamiya 801x/801xt series, XRAY XB8, 808 series, etc.
The Universal Setup Station also comes with two sets of adaptors; the Type-A adaptors are for vehicles with 6mm x M5-threaded axles such as the Traxxas Revo/T-Maxx 2.5/3.3, HPI E-Savage, and Losi LST1. The Type-B adaptors are for the HPI Savage 2.5/4.6/X/XL which uses 8mm x M5-threaded axles with a reverse thread on one side.
Other adapters and bridges are available (sold separately) to adapt the setup station to other vehicles, Please refer to our Universal Setup Station Axle Adapter Fitment Guide to find the correct adapters for your application: Universal Setup Station Axle Adapter Fitment Chart.
Item# C23291
Barcode: 91789008541
| Weight | 2.14 lbs |
|---|
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
3 reviews for Universal Setup Station w/ Bag for Most 1/8 & 1/10 Off-Road, SC & Monster Trucks
Clear filtersOnly logged in customers who have purchased this product may leave a review.
Related products
XSR11 Competition 52-55mm Racing Shock (2) for 1/10 Touring Car & Drift Car
2 in stock
Diff between reg and current: | Diff between reg and current x qty:
XSR11 Competition 52-55mm Racing Shock (2) for 1/10 Touring Car & Drift Car
3 in stock
Diff between reg and current: | Diff between reg and current x qty:
XSR11 Competition 52-55mm Racing Shock (2) for 1/10 Touring Car & Drift Car
8 in stock
Diff between reg and current: | Diff between reg and current x qty:
Realistic 1/10 Size Aluminum Rear Wing 165mm Width
5 in stock
Diff between reg and current: | Diff between reg and current x qty:
Realistic 1/10 Size Aluminum Rear Wing 165mm Width
14 in stock
Diff between reg and current: | Diff between reg and current x qty:
M60 C-Drives for Yokomo 1/10 YR4M2
1 in stock
Diff between reg and current: | Diff between reg and current x qty:
Realistic 1/10 Size Aluminum Rear Wing 165mm Width
2 in stock
Diff between reg and current: | Diff between reg and current x qty:
S12 Type Replacement O-Ring (4) for C25910 Competition Shock
6 in stock
Diff between reg and current: | Diff between reg and current x qty:
1:10 Touring Graphite Wing Holder-1mm
3 in stock
Diff between reg and current: | Diff between reg and current x qty:
Ball Nut M3 6mm Type 4pcs for Tamiya, TRF, Yokomo, 3Racing & C25910
46 in stock
Diff between reg and current: | Diff between reg and current x qty:
Flexible Dust Cover (4) for Yokomo BD Diff
19 in stock
Diff between reg and current: | Diff between reg and current x qty:
Low Friction Blue O-Ring 4pcs 7x3x2mm for TRF, Yokomo & 3Racing 3mm Shock Shafts
95 in stock
Diff between reg and current: | Diff between reg and current x qty:
oracle –
MUST HAVE ITEM
If you are just playing around with a RC car or truck, just keep playing. When you are a serious racer this setup station is a must. This setup station allows the vehicle to carry the batteries or fuel that would be the weight of race trim to the setup. You are able to dial in every toe, camber, caster with the actual vehicle weight, this is very useful. After a few runs you will be able to tell faster constant true alignment. Off road is great but you don’t need all of what this item can go in depth with. On road is a must, your alignment is so close to perfect, that after a few runs you will notice some wear on the inside or outside of the tire. At this point it basically shows an tells what final tweaks to do. I use this on a XO-1 and on a on road E-Revo setup, after using the setup station, dialing it in, just rotate tires after each run. This will pay for it’s self within a few set of tires you don’t have to buy. My Xo-1 I use it the most because of loss of control at high speed an have to realign again. My on road E-Revo I haven’t used it in a while, just always rotate the tires, an it is so precise all the tread will wear so even that it looks as if the tires were slicks. If you wan’t to get dialed in, race faster, have the best handling, and save on tire wear, this INTEGY item is one of the most valuable tool you need to have, Save money and get extreme alignment with this INTEGY item, you will wish you would have purchased it sooner!
Jeff –
Set up kit
This is a nice set up kit, I have the associated B44.3 and had to make two modifications to make this work, First i had to shave off the back of the front nuts that hold the equipment onto the axle. the front axles are shorter in the front and this allows enough room to grab several threads. With this done everything works except the toe ruler. Upon a suggestion from Integy I ended up using two 3/32 washers, one on each side. the washer goes on first then the measuring tool. This now will allow the tow ruler (the shortest one) to measure your toe. without the washers spacing the tool out the toe ruler is too long and you can not get a toe measurement.
I would highly recommend this to everyone, You can get everything set up correctly. no more eye balling it, (it was way off)
jose luis –
Help, manual of instructions
Hello, he(she) would need the manual of instructions, where I can obtain it?